Home > PRODUCT > Barcode Scanner


     Wireless Barcode Scanner (MKB-W/53) Features1. The overall design of the product is delicate and exquisite. The head of the scanner, the handle and the base are protected by rubber, and the

    1. 详细信息

     Wireless Barcode Scanner (MKB-W/53)




    1. The overall design of the product is delicate and exquisite. The head of the scanner, the handle and the base are protected by rubber, and the scientific inside struck design enhanced the crashproof function, which is unmatched by the common wireless barcode scanner in the market.

    2. There is a new leap in the code reading function. With the new technologies of the decoding chip, the scanner can be read and transfer more quickly.

    3. The easy setting procedure can make sure the client learn to use it quickly ,which avoid the complex setting when you use it..

    4. The big capacity battery is 1.5 times of the common scanner , so our scanner can be use for a longer time.

    5. The far transmission distance: ,i.e. 500m in the empty space(normally 50-200m in  the room,which is according to the indoor structure.

    6. Super larger memory: it can store 100,00-300,00 of barcode.

    7. Powerful matching function: supporting 3 kind of work modes (one to one , one –to many and many-to-one). One receiver can receive messages from 255 pieces of scanner at the same time.

    8. Uploading the date intelligently, it can upload the date breakpoints continuingly (the scanner will store the date in it’s own memory, when the date can not send to the computer successfully. And upload the date to the computer when it is convenient)

    9. The stand-by mould technology can save the power, so it can use longer time.


    Function explanation:

    1. Storage function: the scanner will automatically store the date in it’s own memory when the date can not upload to the computer successfully.(when the transfer distance is too far or there are other signal interruption). It guarantee the date will not be lose.

    2. Low power alarm function: If the scanner enter the stand-by state when it is reading the barcode or when you just turn on it automatically and the indicators flickers continuingly at the meantime, it means the battery need to be charged.

    3. Stand-by state: when it is not used , it will enter the stand-by state automatically.

    4. Charging: Inserting the crystal plug into the interface of the scanner and inserting the usb plug into the computer’s usb interface. When the indicator is red , it means it is being charged.When the red indicator flames out, it means the battery is charged fully.



    Source Type

    Visible laser diode, wavelength 650nm

    Scan Mode

    Single scan

    Scan speed

    100 ± 2 times


    ≥ 4mil

    Print Contrast

    30% minimum reflectance difference.



    Charging input voltage

    DC 5VDC ± 0.25 V


    100 mW (work): 400 mW (maximum instantaneous)



    20 mA (work): 100 mA (maximum instantaneous)

    Standby current


    The light intensity


    Depth of field


    Scanning angle

    ± 60 ° ± 65 ° ± 42 ° (left and right, front and rear, turn)




    Decoding capability

    UPC/EAN/ AN, UPC/EANwith Supplementals,UCC/ EAN128,Code39,MSI,Code11,Code39 Full ASCII,Code 39TriOptic,Code128,Code128Full,ASCII,Codabar, Code93,Discrete2of5,IATA,RSSvariants,Codabar, Chinese2of5, Inteleaved2/5, Interleaved2of5, the postal code and other countries,Interpersonal GM - dimensional bar code

    Lift method

    Buzzer, LED indicator


    L * W * H: 158mm * 68mm * 96mm



    Charging Interface Type

    RJ-45 crystal head, length 1 m (with a USB charging cable, when the red light is charging ,When the red light is off the battery is full)

    Seismic capacity

    multiple drops from a height of 2 m to concrete still work